If you’re looking for the best plumbers in London, especially Edgware plumber and plumbers in Hendon, you are at the right place!

The following information will let you know how to find a safe and right plumber. You might experience household issues that need to be sorted especially during the winter months. Your boiler may give trouble, your water pipes might split open, and your heating system may stop working etc. If you are in that situation contact us to arrange a free quote for boiler repair or plumbing needs. Keep in mind that you do not want to call people who are uncertified or inexperienced in haste because they might withdraw half way through a job. In order to avoid such deception, here are some tips how to find the right and safe plumbers in London.

• Referral work from friends, family, colleagues and neighbors will help you to find a trustworthy plumber, electrician etc. They would have also experienced these troubles, so they surely know where to look for the best plumber. It is obvious that they will not recommend any untrained persons when asked for help.
• Trust mark is one of an approved trader scheme. They have a website where you can type your post code and it will show you a list of plumbers or builders or electricians of your choice. It will show all the plumbers within 50 miles closest to your post code. For instance if you are in Hendon, type in the Hendon post code and it will show you a list of plumbers in Hendon, including us.
• Online recommendation hubs are always better than choosing some plumber accidentally.
• Reviews about many plumbing coompanies will help you to find your best plumber in London.
• Find plumbers who will provide offers and guarantee, for instance if the customer feels the cost is too much the plumbers must quote them a reasonable amount and also if the service is not good they guarantee money back.

Following these tips one can find the a good plumber. A trustworthy plumber is always a fortune. We provide you the best plumbers in Edgware, they are experienced and reliable. Contact us anytime through telephone or email, we are ready to help you. We look forward to hear from you!

Light switches can be faulty sometimes and cause inconvenience. Faulty switches can also be unsafe. Hopefully this article will help you overcome that problem. Anyone can replace a faulty light switch but if you’re not sure or confident in what you do, please give us a call and we can help. We provide a good service in London and surrounding areas.  Before starting, there are some parts you might need :

• A replacement outlet which will have the amperage capability as before is needed.
• A cover for the replacement switch is needed if the removed switch is cracked or dirty.
• Proper wire connectors should be used.
• An electrician’s tape is needed.

There are certain precautions one has to take before doing any electrical work:

• First, see whether the main power is switched off
• Next check whether the circuit is dead with the tester.
• Then be careful while opening multi-way switches.

Step to replace a faulty light switch:

Step 1: Circuit breaker must be switched off

The very first thing you have to do is to see whether the main fuse is removed so that there is no circuit passing. Usually in flats and old houses, there may be quite a few fuse boxes. It is mostly situated in the basement, garage or stairway. These boxes will be attached to walls and will be covered by a door. The fuse will be behind these doors and can be unscrewed by turning it anti clockwise. Since the circuit breaker is common for all modern ones turning it off will not be a problem.

Step 2:  The switch cover should be removed

Soon after the circuit is cut off don’t forget to remove the plate which covers the switch. The plate will be usually held by two screws. The one thing you have to keep in mind is that if the plate is covered by wallpaper or paint you have to carefully scratch out everything before removing. Then cover the switch with a slightly larger plate. (electrician in hendon, hendon electricians, electrician in london )

Step 3: Remove the older switch and connect the new one

There are two wires, one is the incoming and the outgoing supply wire. One wire will be connected to the junction box and other is for grounding. In order to remove the faulty switch, loosen up the screws to remove the two wires from the terminal. After the wire is removed, now connect the new switch to the wire by tightening the screw. You have to tighten the screws by turning it in the clockwise direction.

Step 4: Switch on the main power

After the whole process is over in replacing the light switch, replace the outlet plate and the main power can be switched on but must be carefully handled.

It is always good to approach an electrician before taking any risk. You can always rely on us for help. We provide competent electricians in Hendon who can repair you’re defective switch. Feel free to call us for any electrical problems.